TEA5767 I2C FM stereo radio tuner module

Description

A module that allows you to build a fully functional radio. It is controlled by the I2C bus. It is powered with the voltage from 2.5 V to 5.5 V. It has a high sensitivity thanks to the integrated low-noise amplifier. It works, i.a. withArduino,AVR,Raspberry Pi.

Specification

• Supply voltage: 2.5 V to 5.5 V
• Supply current: 15 mA
• Modulation: FM
• Frequency range: 70 MHz to 108 MHz
• Built-in quartz resonator: 32.768 kHz
• Communication interface: I2C
• Pins' pitch: 2 mm
• Sizes: 11.2 x 11.2 mm

Details inthe documentation.

Pins pitch

The system has the pins for surface SMD soldering. The pitch is 2 mm.

No. Name Description 1 SDA The data line of the I2C bus. 2 SCL Clock line of the I2C bus. 3 BUSMODE You need to connect it to ground. 4 Write/Read You can leave it unconnected. 5 VCC The supply voltage of 5 V. 6 GND The ground of the system. 7 R-out Output - right channel. 8 L-out Output - left channel. 9 MPX0 You can leave it unconnected. 10 ANT The pin for the antenna connection.

  

Useful links

• Documentation of the TEA5767 chip
• Example of connecting to Arduino